Payment & Shipping Terms:
|Screen Brand:||Model 600 Shaker||Model No.:||500 / 600 Shale Shaker|
|Screen Type:||Corrugated / Flat Screen||Screen Tension:||Hookstrip Tension|
|Rubber Seal:||Reduce Fluid Bypass||Weight:||6.5 Kgs|
oil vibrating sieving mesh,
stainless steel wire mesh screen
Model 600 Replacement Shaker Screen Corrugated Screen / Flat Screen
In solid control processing, shale shaker screen plays a key role for eliminating the solids through the screen. So it is imperative that they are prone to damage if not kept properly clean and that will naturally increase the overall project cost.
Here are some useful tips to keep the shaker screen clean and intact:.
Steel wire brush will actually damage the screen, so stay clear of brushes in your cleaning process.
The shaker screen constantly sieves the waste material and likely to get clogged with waste material and as a result the screen holes will be blinded and hamper the process if filtration. To clean the blinded screen holes, use the water hose from back side. You could consider removing the larger particles manually, but never with a brush or stick, as the mesh of the screen is prone to be torn in the process if you use any of these.
Make sure that the screens are not left with the drilling waste i.e. drill cuttings and mud to be dried while in the screen. This will invariably lead to a pre-mature failure of the equipment.
Never allow any worn out rubbers to be used in the equipment, this directly lowers the performance of the equipment and damages the shaker screen.
Do not allow any other material to be placed over the shaker screens, either in function or in storage.
With these basic cleaning procedures, you could ensure a longer life for the shaker screen.
D100 Cut Point (Micron)
Contact Person: admin